Monday, December 19, 2011

Download Dell Streak Unlock Software????

Our Dell Streak Unlocker reads the original unlock code from your Streak 5 and enters it automatically into the phone to unlock it. You do not need a SIM card during the unlock process. Unlocking lets you use your phone on any carrier that uses SIM cards. The warranty is maintained because there is no alteration of the phone's software. Try the unlock software to determine whether your Streak can be unlocked. If so, we guarantee that our Dell unlock code generator will get you the proper code to unlock your phone. 

Phone Requirements:
Dell Streak 5 or Dell Mini5 (any version including Android 2.2)

System Requirements:
Windows 7, Vista, or XP (32/64bit)
Part 1/2: Prepare For Unlocking
1.      Before You Start: You will need a USB cable to connect the phone to the computer. You can use the software with any SIM or no SIM inserted. 


  2.      Check that your device is GSM. Our program only works on GSM devices. GSM devices will have a SIM card slot in the battery case (see the top right in the below diagram):

Part 2/2: Unlock Instructions

First Download Dell Streak Unlocker Software. Then Install on Your Pc. Download From here

You will be asked to install drivers for your device. Click Continue and OK.

The driver installation will then install the drivers. Click “Next” to continue at each step. If you are prompted to install unsigned drivers, please allow it.

If you would like to unlock your phone now, leave the checkbox checked and click “Finish”.

The unlocker program will launch and display the following screen:

Now you can do a free unlock test to see whether your Streak can be unlocked. If it is unlockable, purchase a registration code by clicking on Purchase Dell Streak unlock or by following the link below.

Once you have a registration code, enter it and then click the “Unlock Phone” button to continue. When the program asks you to, hold the camera button on the top of the phone and click the continue button. Hold the camera button until the white screen appears. Touch the “FastBoot” box in the corner of the white screen:

The program will run to completion and enters the unlock code into the phone automatically for you. This may take a few minutes. Finished! Your phone is now unlocked for use on any compatible carrier. It will never re-lock even if you update or wipe the phone. Enjoy mobile freedom.

Troubleshooting: The unlock software is frozen or is keeps showing "Waiting For Fastboot" or "Waiting For Boot"


1.      Right click the PDAnet Desktop icon
2.      Exit

Troubleshooting: The unlock software still freezes at about 70% when the unlocker is running.

Solution 1: Do the free trial unlock before using an actual registration code. Then repeat with the registration code.

Solution 2: 

- Unplug Streak
- Turn off Streak
- Replug Streak
- Turn on Streak
- Unlock again

Solution 3: If you do have Android drivers installed, simply unplug and replug phone during unlocking and drivers will install OR, go to and download and install Streak drivers. Then reboot PC and start unlocking again.

 If You Like This Post Share it using Below Buttons
If Have Any Problem in this Post?
Please Comment Below….

1 comment:

  1. Thanks for giving information.
    I am not aware about this way of unlocking.
    Here i wish to add my own unlocking experience.Recently i unlocked my Dell Streak mobile phone using network unlock code.I bought an unlock code from I like their services.


Here Comment is Do-Follow So Comment And Improve Your BackLink.